When I receive SMS/WhatsApp messages, the message is not read out in full. How can I fix this?

1: Reset and update the device: press and hold the button for 15 seconds to reset the device.

To update on an iPhone:

(1). If your iPhone is connected to wireless CarPlay, enter 192.168.1.101 in your iPhone's browser, then tap “Update” (if an update is available).

(2). If your iPhone cannot connect to wireless CarPlay, manually join the adapter's WiFi network (password: 88888888). Then enter 192.168.1.101 in your iPhone's browser and tap “Update”.

2: Set the audio streaming mode: after successfully connecting your device to your phone, open the address “192.168.1.101” in the browser. Once you are in the device's web interface, select the appropriate audio streaming mode until it shows OK. The device restarts automatically after each selection, so please be patient.

3: Raise the WiFi-AP in the web interface: after successfully connecting your device to your phone, open the address “192.168.1.101” in the browser. Once you are in the device's web interface, increase the WiFi-AP value.

If the above methods still cannot solve the problem, please contact customer service and provide the Log (the manual describes how to collect the Log), a video describing the fault, and the car's year, model, and multimedia head-unit software version.